![[view cart]](/sites/all/themes/diamond/images/cart-icon.gif){kind=icon}
This polyester resin is designed to seal saw cuts made while installing inductive loops. It comes in one gallon cans with a small tube of hardener.
Cure time is normally 20 minutes, 10 minutes in hot weather, 40 minutes in cold.
Loop Sealant (Pro 6006)
Easy to use
Fast
Rapid cure
Outstanding protection
Specifications
| SEALANT TYPE | Polyester | |
| COLOR | Dark Brown | |
| TACK FREE TIME | 10-15 Minutes (@ 77 ° F) | |
| COMPLETE CURE | 1 hour | |
| TENSILE STRENGTH | 1,130PSI | |
| TENSILE ELONGATION | 15% minimum | |
| PACKAGING | 1 GALLON with Catalyst |
For one gallon, just add two 1oz. tubes of catalyst. (included)
Completely mix contents of can from bottom up. For best results, use a powered mixer. Mix until a uniform color is achieved and there are no visible streaks of red catalyst. Normal mix time is 1-3 minutes.
 |
||||
